This product has the China national quality inspection certification, the heating element and the circuit board all meet the CCC standard, and there are no problems such as inaccurate parameter description exaggeration. The quality has guaranteed, it can be used safely.

Suggestion

1.The 7000w power needs at least 220v 32A to play the best effect, if the condition is insufficient, the machine can still run normally, it will automatically adjust the power according to the actual situation of your home voltage and current, so check the electricity meter and air switch load value, or contact us, please confirm before buying.

2.The heating effect depends on the cold water temperature and water flow per seconds. If you use it for bathing, we suggest customers in Brazil and Chile, you can choose 5500W（7000W better）; European customers, 7000W power products will satisfy you, believe me, products below 7000W will not be able to guarantee the hot water temperature and water flow you need when taking a bath.
We sincerely hope that you can get the product after more than ten days of transportation and get satisfactory results.

3.The water heater must be installed vertically.
4.The first using the machine, first turn the water on and then power on, avoid damage.Subsequent use just open water 5nd no need to cut off the power when not in use but turn off the machine suggestion.
6.The water heater needs to reach the required water pressure to start, >0.03Mpa.
7.This product is a high-power electrical appliance and does not provide a plug. If you do not know how to connect with your power supply, please contact us.

Product Feature

1. AI thermostatic - The power can be automatically adjusted according to the temperature of the incoming water to reach the temperature you set and energy saving.
2. HALL SWITCH WATER FLOW SENSOR - Water flow is heated by sensor equipment. There is no need to cut off the power when not in use, and you only need to turn on the water switch every time you use it, and the water will automatically heat up when it passes through.Air or waterless flow is not heated.
3. High quality stainless steel Heater - 3D SURROUND CONSTRUCTION，STABLE HEATING .
4. AUTOMATIC MEMORY - After setting the temperature, there is no need to repeatedly adjust the temperature.
5. HYDROELECTRIC SEPARATION - Water circuits are used to operate in isolation, The whole family can rest assured to use it.
6. STARTUP AUTOMATIC FAULT CHECK - Power on to check for faults, and automatically shut down for protection after faults are found to ensure your safety
This product suit for providing hot water for a kitchen, bathroom, small sink, office breakroom and others.

Specifications

Brand:JGL
Rated power:5500W/7000w
Rated frequency:50-60HZ
Rated voltage:220V
Max temperature:55℃
Kitchen:Yes
Bathroom shower:Yes
Auto-djustment power:Yes
One key thermostat:Yes
Sense heating:YES (air or waterless flow is not heated)
Auto fault check:YES
Display:LCD
Control method :Touch control
Waterproof:IPX4
Installation mode: punch free wall ounted.
Water pressure requirements:0.03Mpa
Plug type: Power cable
Size:260*160*60mm(5500W)/278*188*61(7000W)

Tips

Package Included

1 x Instant water heater
1 x power cable